ターンテーブル用コントロールモータ Turntable control motor - for use with Peco turntable kits
- 購入数
-
お取り寄せ商品
- この商品をシェア
-
この商品について
ペコ マニュアルターンテーブル用のコントロールモータとコントローラです。
お取り寄せ商品になります。
ご注文をいただいてから商品のチェック、発送まで３週間程度かかります。
都合によりお取り寄せが不可能な場合もありますのでご了承ください。
メーカ：PECO
電源：12V DC
Specification & Features
Input 12v DC
Depth: 50mm including brackets - 85mm recommended below baseboard height
Width: 60 mm
Requires 12v DC 2 amp supply, sold separately.
Compatible with the following Peco turntable kits
OO gauge - LK-55
N gauge - NB-55
On30 / O-16.5 narrow gauge - LK-555
HoM scale - LK-1455
This non-indexing motor (which means that there are no pre-set or programmable settings) means that the modeller can simply line up the deck against the exit or entrance road by eye, and the controls allow for small adjustments should things not align perfectly. This gives the modeller ultimate flexibility and control, and means that existing turntables on layouts can easily accommodate the new motor without any major track re-laying exercise! Power has to be provided from an independent 12vDC 2 amp supply, but other than that everything needed is included. Operating the motor is straightforward: you press and hold either of the clockwise or anti-clockwise buttons to rotate the deck and release the button when you wish to stop. Operation is extremely smooth.
Retro-fitting the motor to an existing turntable in-situ is easy. The kit is supplied with three mounting fixtures that, when assembled, are glued to the underside of the turntable deck. There is also a special joining collar that links the motor to the central shaft of the turntable deck. Although this is a tight interference fit it is best that this is also glued into place. Full instructions are included in the kit.
お客様レビュー
全てのレビュー(0件)を見る »
商品レビューを書く
- トップ
- ペコ Peco
- 制御機器他
0
0
