橋脚　Bridge pier

ノッホ NOCH
型番：nh67032

販売価格 3,350円(税込)

購入数

在庫数： 1 残りわずか！

この商品について

メーカ：ノッホ
スケール：HO 1/87
大きさ：60 x 35 (bottom) mm、50 x 25 (top) mm、190mm高さ

bridge pier

Laser-Cut Bridge Kit System H0
The bridge system developed by NOCH combines the product advantages of laser cut and rigid foam parts. All of the H0 gauge bridge kits shown on the preceding pages can be combined with one another so that exemplary bridge constructions can be assembled.
So you can e.g. For example, combine the fish-bellied bridges with the short receiving water, build in several box bridges one after the other or design an attractive ramp with the help of the bridge decks.
The bridge pillar (item no. 67032) is required to combine several bridges. This is made of hard foam and can therefore be easily attached – e.g. B. with a handsaw - to be cut to the appropriate height. There are no limits to your imagination when combining and designing the bridges, as many of the laser-cut bridges already available from the NOCH range can also be combined with the system.
The steel bridge (item no. 67010) can therefore be used e.g. B. use as receiving water bridge. Bridge pier adapter pieces (item no. 67031) are required for the combination of certain bridges.

Note: You need the »bridgeheads for bridges with beams« if you want to combine the receiving water (item no. 67023) with a bridge without beams (e.g. item nos. 67024, 67025, 67026, 67029, 67030, 67050) to integrate the entire construction into the landscape on the right and left.

Note: This bridge is designed for 1-track railway lines. For two-track train operation, two bridges can be built next to each other. This laser-cut bridge can be combined with the »Steinmauer PROFI plus« series.

商品についてのご質問や、追加でご覧になりたい画像など
お気軽にお問い合わせ下さい

この商品について問い合わせる