22ピンデコーダ LokPilot V4.0 M4, Multiprotokoll MM/DCC/SX/M4, PluX22 NEM658
- 購入数
-
お取り寄せ商品
- この商品をシェア
-
この商品について
ESUの22ピン用デコーダです。デジタルインターフェースがPlux22と書かれている機関車に取り付けられます。
お取り寄せ商品です。
ご注文をいただいてから商品のチェック、発送まで３週間程度かかります。
都合によりお取り寄せが不可能な場合もありますのでご了承ください。
メーカ：ESU
スケール：HO 1/87
Operational modes: DCC 14, 28, 128 speed steps
DCC long and short addresses
DCC traction address (Consist Mode)
DCC LGB pulse control
Automatic speed step detection
Lenz® LG 100, ROCO® brake unit
Lenz® ABC brake unit
ZIMO® HLU commands
DC analogue operation
Motorola® 14 speed steps
Motorola® 28 speed steps
Motorola® address 1 - 80
Motorola® address 1 - 127
Motorola® address 1 - 255
M4 data protocol (mfx® compatible)
Selectrix®
Märklin® brake unit
AC analogue operation
Automatic detection of operational mode
Throttle: DC and coreless motors, AC motors with magnet
PWM frequency 40,00 kHz
Load control in digital operation
Load control in analogue operation
Adj. start / maximum speed in analogue operation
Mass simulation for 14 speed step operation
Autotune function for load control
DDC (Dynamic Drive Control)
Continious motor current 1,1A
Short circuit protection
Function outputs: Amplified function outputs with short-circuit protection 4 / 6 (PluX16)
Current of each output 250mA
Logic level outputs 2 (21MTC)
Output dimming
Light effects like Blinking lights, Marslight, Fire box flickering etc.
Time-controlled function outputs
Function Mapping V4.0 ESU (F0 - F28)
Function Mapping M4® compatible
Shunting mode (de-selectable)
ABV (de-selectable)
Serial protocol (for SUSI)
Programming:
DCC service mode programming modes (Register Mode, Address Only, Direct Mode)
DCC POM (Programming On the Main)
Programming mode for Märklin® 6021
M4® configuration on the main track
Specials: M4® feedback system
RailCom® feedback system
RailComPlus® automatic recognition
Storage of current operational state (memory)
Motorola® wrong-direction bit
»PowerPack« energy storage optional
Dimensions in mm: 21,4x15,5x5,5
お客様レビュー
全てのレビュー(0件)を見る »
商品レビューを書く
- トップ
- エズー ESU
- 制御機器
0
0
