DCCコントローラ ECoS 2.1 Zentrale, 6A, 7" TFT
- 購入数
-
お取り寄せ商品
- この商品をシェア
-
この商品について
ESUのDCCコントローラ ECos�兇任后�カラー液晶ディスプレーでタッチパネル方式です。スロットルも2つ装備され、使いやすいです。
お取り寄せ商品です。
ご注文をいただいてから商品のチェック、発送まで３週間程度かかります。
都合によりお取り寄せが不可能な場合もありますのでご了承ください。
メーカ：ESU
Hardware:
H4 booster with 6.0 A continuous-load output
RailCom® bidirectional feedback detector with integrated cutout device ("global detector")
H4 programming track connection, 0.6 A rated
7 inch TFT colour display with touchscreen, 800x480 (pixels) display resolution
32-Bit ARM 720T controller, 64 MByte flash ROM, 32 MByte RAM, Linux® operation system
16 Bit real-time co-processor
2 motor-driven potentiometer throttles with end stop
two 2-way analog joysticks; two 9-function keys plus stop- and go-key
3 input sockets for ECoSlink systems
Connection for ECoSlink bus expansion
Galvanically isolated booster input for external DCC or Märklin® 6017 boosters
Galvanically isolated ECoSniffer input for connection of old units
Galvanically isolated s88-bus input for feedback devices; 10/100 Mbit ethernet connection (RJ45)
1 ECoSlot module for radio-receiver input
Software:
DCC with 14, 28, 128 speed steps, LGB® compatible function key handling
RailCoM®
Märklin® Motorola® old, new, with 14 or 27 speed steps (2 modes, depends on availability of decoder)
Selectrix® track format
M4 data protocol with automatic recognition
Up to 9999 addresses for DCC protocol. Up to 20 function keys per loco
Up to 255 addresses for Motorola® protocol (depends on availability of decoder)
Märklin® Motorola® and DCC track protocol for control of electromagnetic accessories
Up to16384 locos, 2048 turnouts and 1024 route objectives; 32 MU´s (multiple consists) with up tp 16 locos each
Up tp 16 shuttle trains (back´n forth) at the same time
All DCC service modes programming on programming track, POM (programming on the main)
Programming of Motorola® and Selectrix® on programming track.
Included in delivery:
ECoS central unit
Stylus for touch screen
Power supply output voltage adjustable from 15V to 21V / 5A (90VA)
Terminals for mail track and programming track connection, ECoSniffer
Extensive instruction manual
Dimensions:
37.0 cm x 16.0 cm x max. 9.0 cm
お客様レビュー
全てのレビュー(0件)を見る »
商品レビューを書く
- トップ
- エズー ESU
- 制御機器
0
0
