お取り寄せ商品です。
ご注文をいただいてから商品のチェック、発送まで３週間程度かかります。
都合によりお取り寄せが不可能な場合もありますのでご了承ください。

メーカ：ESU
スケール：ALL

LokSound 5 micro DCC / MM / SX / M4 "empty decoder", single strands, with loudspeaker 11x15mm, gauge: N, TT, H0

The LokSound 5 micro is a "little miracle": With only 21mmx10mm footprint it is By far the smallest LokSound decoder we've ever built. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is also always included.
Operating modes
The LokSound 5 micro is also a true multiprotocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In the DCC format, 14 to 128 speed steps are as natural as 2- and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log onto a suitable digital central unit fully automatically.

It controls all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with the appropriate control panels. Auxiliary registers exist for panels that can only program the CVs from 1-255.

Motorola® users benefit from up to 28 speed steps at 255 addresses. Three additional Motorola® addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.

The M4 protocol allows automatic logon to mfx®-compatible control panels.

The LokSound 5 micro decoder recognizes the Märklin ® Braking sections as well as ZIMO® HLU brake commands or the Lenz® ABC system. Braking with DCC brake modules or DC voltage is also possible. He also stops with a Selectrix® brake diode. An ABC automatic shuttle system allows automatic commuting between two stations.

The LokSound 5 micro decoder can be used on analog DC and AC systems (!).